Top 10 Engine flushing Oil UK – Car Engine Oils

As an Amazon Associate I earn from qualifying purchases.

1. Carlube


Carlube Flushing Engine Oil 4.55 Litres

Carlube #ad - Carlube flushing oil has been formulated using the highest quality mineral base oils and detergent/dispersant additives to provide a flushing oil with a wide variety of applications. 4. 55 litre. Suitable for petrol and diesel engines. Helps remove harmful deposits and sludge. Contains anti-wear additive to protect engine during cleaning.
BrandCarlube #ad
ManufacturerTetrosyl Ltd #ad
Height28.5 cm (11.22 Inches)
Length18 cm (7.09 Inches)
Width12.5 cm (4.92 Inches)
Part NumberXFL455



XADO Set of 2 pcs Verylube Flushing Oil for Engine and Gearbox Transmission

XADO #ad - Intensive flushing of heavily soiled aggregates in 30 - 40 minutes through the action of the EP Additive package. Wear protection reserve revitalization technology. Restoration of the mobility of the oil scraper and compression rings. Prevents bonding of hydro-compensator. This flushing oil allows safe flushing of the oil system for engine and transmission.
BrandXADO #ad
ManufacturerXADO #ad
Part NumberXA 20250
ModelXA 20250

3. Bargainstore


Bargainstore Engine Flush 450ml For Petrol Or Diesel Engines Oil Flushing Clean Additive

Bargainstore #ad - Helps maintain Engine Performance. 450ml. Engine flush 450ml for petrol Or Diesel Engines Oil Flushing Clean Additive. Used for both Petrol & Diesel Engines. Suitable for all Petrol & Diesel Engines.
BrandBargainstore #ad
ManufacturerBargainstore #ad
Part Number62450ENB

4. LLL


LLL STP Engine Flush 450ml For Petrol Or Diesel Engines Oil Flushing Clean Additive

LLL #ad - Adding stp engine flush directly to the used motor oil prior to draining helps neutralise engine acids while it works to loosen and remove sludge, varnish and gum deposits that ordinary draining leaves behind.

Use stp engine flush with every oil change. Engine flush 450ml. Stp engine flush contains an anti-wear additives to help protect engine surfaces during cleaning. Even quality motor oils can form acids due to combustion by-products, high temperatures and oxidation. Compatible with single multi-grade mineral or synthetic oils. Grit and sludge-forming acid residue can remain in the crankcase even after draining the engine oil and replacing the filter. Suitable for use in Petrol and Diesel vehicles. This contaminated residue can affect the lubrication life and engine protection of the new oil.
BrandLLL #ad
ManufacturerLLL #ad
Part NumberLLL-24

5. Unknown


Wynn's Engine Oil Flush Cleans Inside Engine & Removes Harmful Deposits 425ml

Unknown #ad - Quietens noisy hydraulic valve lifters by removing deposits & neutralises acids. Quickly and efficiently dissolves varnish, sludge and other contaminants from vital engine parts. Is compatible with all mineral, synthetic, single and multigrade oils and suitable for regular and low SAPS applications. Cleans engines, hydraulic systems, gearboxes and differentials internally. Frees sticking internal engine components by dissolving deposits, preventing contamination of fresh oil by residues left behind.
BrandUnknown #ad
ManufacturerWynn Oil UK #ad
Height15.7 cm (6.18 Inches)
Length5.69 cm (2.24 Inches)
Weight0.26 kg (0.58 Pounds)
Width5.69 cm (2.24 Inches)
Part NumberWYN51265
Warranty12 months

6. Morris Lubricants


Morris Lubricants Golden Film Flushing Engine Oil, 5 Litres

Morris Lubricants #ad - Golden film flushing oil is a combination of highly refined light mineral oils and detergent/dispersant additives to enhance removal of sludge and lacquers.
BrandMorris Lubricants #ad
ManufacturerMorris Lubricants #ad
Part NumberFLU005



For diesel and fuel petrol engines motors systems I treatment cleaner degreaser I flushing additive, 250ml, SYPRIN Engine oil flush

SYPRIN #ad - Engine maintenance plays an important role in every vehicle, since the engine is at the heart of a vehicle and ensures its operation. Why engine flushing: development of dirt particles is reduced and existing ones can be solved I cleaning and maintenance of the entire system takes place I prevention of wear on the fuel lines, injectors and valves.

Compatibility: the system flush is suitable for diesel and petrol engines, with or without a particle filter I can be used at any time without any kind of pretreatment I 250ml are sufficient for 5 liters of oil. Application: engine interior cleaning should be used before the next oil change I before filling the new oil into the engine, it should be lukewarm so that the engine flush can be added I then let the engine run at idle for 10-15 minutes.

Made in germany: the engine flushing system was developed and manufactured in Germany I it is a highly developed maintenance matrix which is responsible for ensuring that the engine is virtually flushed through on the inside.
BrandSYPRIN #ad
ManufacturerSYPRIN #ad
Part Number#MLID#900

8. Lubrisolve


Lubrisolve Classic 20W/50 Engine Oil 1 litre

Lubrisolve #ad - Formulated with mildly enhanced anti-wear technology for added engine protection. Excellent sludge control for cleaner engines. Incorporates excellent corrosion resistance to protect engine internals and components. Enhanced anti-oxidant performance.
BrandLubrisolve #ad
ManufacturerLubrisolve #ad
Part NumberLCO20w501



1 x Engine Oil System Conditioner 350 ml

MANNOL #ad - Removing residue, dirt, mud and wear products at motor Einzelteilen. Cleans the Ölsystem and the mesh filter the oil. Special detergent dispersant Extra guarantees highly effective and safely remove debris.

Then oil – and filter change. One can is sufficient for up to 6 litres motor flush the warm engine oil to put on changing oil add. After the addition motor approx. Mannol 9900 engine flush 350 ml is a special cleaner for removing residue Verschmutzungen sludge and working products of Einzelteilen. 10 minutes run when idle. Ensures stellt cleans a reliable lubricates.

Use with care. It is a reliable lubrication the wear and tear securely during cleaning the engine is Einzelteile prevents. Wave shop oils and fabric accessories: Mannol motor flush 9900 443 ml – Professional Oil system conditioner. Always read the label and product information before use label and product information may not be in English.
BrandMANNOL #ad
ManufacturerMANNOL #ad
Part NumberB00SB5L2HQ

10. CarPlan


300 ml, Carlube Engine Flush

CarPlan #ad - Suitable for both petrol sand diesel engines. Helps remove harmful deposits and sludge and neutralises engine acids. Contains anti-wear additive to protect engine during cleaning. Helps free valves and sticking engine parts. Compatible with mineral and synthetic based oils.
BrandCarPlan #ad
ManufacturerTetrosyl Limited #ad
Height19.7 cm (7.76 Inches)
Length8.9 cm (3.5 Inches)
Weight0.29 kg (0.65 Pounds)
Width3.7 cm (1.46 Inches)
Part NumberQPF300